HT 20 - Temperature Regulator with Common Mains/Sensor Connection

The HT 20 temperature regulator in a plastic case has one multi-pole plug socket for sensor and power connection. It is particularly suitable if regulator and heating (e.g. heating hoses, heating jackets, heating mats etc.) have to be disconnected quite fast. HT 20 has a two-pole On-Off switch and two-pole power relay. As the number of switchings is limited, the abrasion of the relay contacts is reduced. In case of an interrupted sensor line or a sensor fault, the device cuts off immediately. A control lamp indicates the failure.

Technical Data

controller type two-position-regulator
control system P-PD
power control with relay
switching power at 230 V~ 2300 W
power switch all-pole, unlit
degree of accuracy 2.5 %
control amplifier 2 %
safety class II
protection category IP 50 (EN 60529)
power cable 1.3 m
case dimensions 55 mm x 80 mm x 160 mm
case material ABS / polycarbonate

Order Data - Sensor Type Fe-CuNi (J)

order no. temperature range
062001 0 ... 100 °C
062002 0 ... 200 °C
062011 0 ... 250 °C
062003 0 ... 500 °C

Order Data - Sensor Type NiCr-Ni (K)

order no. temperature range
062004 0 ... 100 °C
062005 0 ... 200 °C
062012 0 ... 250 °C
062006 0 ... 500 °C
062007 0 ... 1000 °C

Order Data - Sensor Type Pt100

order no. temperature range
062008 0 ... 100 °C
062009 0 ... 200 °C
062013 0 ... 250 °C
062010 0 ... 500 °C

Order Data - Accessories

order no. accessories
079904 plug set HT 20
 
HT 20
Horst HT 20 Temperature Regulator with Central Mains / Sensor Connection

Hotline: +49 (0) 6251 9626-0