Heating Hose Series H 13 B

Self-Limiting Heating Hose with Irremovable PTFE Inner Tube

Self-limiting heating hoses continuously adapt their heating power depending on media and ambient temperatures: the heating power increases when the temperature falls, it decreases when the temperature rises. If temperature differences occur in some sections of the heating hose, the heating power is adapted section by section to the ambient temperature. The result is a homogenous heating-up.

Self-limiting heating hoses are designed for heat loss compensation of tempered media. The temperature specifications of H 13 B heating hoses refer to the maximum admissible medium temperature and its maintenance at 10 °C ambient temperature.

Ready-made heating hoses can optionally be equipped with thermocouples or Pt100 temperature sensors.

Up to a length of 100 m, H 13 B heating hoses are also available by the meter for self-finishing. The length of the heating hose can be determined on the spot (max. length 80 m / 60 m), afterwards it will be mechanically and electrically finished with optional finishing sets.

Technical Data

nominal voltage: 230 V~, other nominal voltages on request
armatures: without, PTFE tube protruding
end caps: with strain-relief and bend protection in PA 6
outer protective hose: polyamide 6 corrugated hose, flame-retardant, halogen-free
outside diameter: 42 mm +/- 10 %
outer diameter: with strain-relief and bend protection in PA 6 or silicone
protection category: IP 44 (EN 60529)
safety class: I

H 13 B - 60 °C Maintain Temperature

heating power: 31 W/m at 10 °C
max. length: 80 m
DN max.pressure min. bend.rad. order no. price per m
4 16.2 bar 200 mm 891841
6 11.7 bar 250 mm 891842
8 90 bar 300 mm 891843
10 7.2 bar 350 mm 891844
12 5.4 bar 400 mm 891845

H 13 B - 100 °C Maintain Temperature

heating power: 40 W/m at 10 °C
max. length: 60 m
DN max.pressure min. bend.rad. order no. price per m
4 16.2 bar 200 mm 891851
6 11.7 bar 250 mm 891852
8 90 bar 300 mm 891853
10 7.2 bar 350 mm 891854
12 5.4 bar 400 mm 891855

H 13 B - Finishes

order no.  
891861 factory-made finish nominal diameter 4-6
891862 factory-made finish nominal diameter 8-10
891863 factory-made finish nominal diameter 412-16
891865 finishing set for self-mounting
 

Hotline: +49 (0) 6251 9626-0