|
|
Accessories
|
Standard Ground Joint Insert with Screwing for Temperature Sensors |
For all glass jars with standard ground joint 14/23. Fixes the temperature sensor and seals the opening.
| order no. | length |
| 07 06 20 | 160 mm |
| 07 06 21 | 250 mm |
|
Electronic Contact Thermometer |
Technical Data:
| sensor: | Pt 1000 in V2A-tube, length: 225 mm, Ø: 3 mm |
| measuring range: | -50 ... +300 °C, with a resolution of 1 °C |
| measuring accuracy: | +/- 1 K +/- 1 digit |
| order no. | type |
| 06 02 01 | standard |
| 06 02 03 | with glass envelope sensor, Ø 8 mm |
| 06 02 02 | AC Adapter - 230 VAC |
| 07 06 22 | accessory: standard ground joint insert NS 19/26 with seal for Ø 3 mm |
| 07 06 27 | accessory: standard ground joint insert NS 29/32 with SI/PTFE seal 16*8 |
|
Multipole Plug |
Six-pole plug for the sensor plug sockets of HORST temperature regulators. For the retrofitting of temperature sensors connecting examples are enclosed.
| order no. |
| 07 99 01 |
|
HER 25 Solid State Relay with Heatsink for DIN Rail Mounting |
This compact electronic single-phase relay switches loads up to 25 A. It is nonwearing and can be mounted quickly on a DIN rail or on an assembly plate. The relay should always be used in its own fused circuit.
Technical Data:
| load voltage: | 24 ... 280 V AC |
| load current (max.): | 25 A at max. 40 °C ambient temperature |
| 12 A at 60 °C | |
| 2 A at 80 °C | |
| working temperature: | -20 °C .. 80 °C |
| dimensions: | 98 x 22.5 x 103 mm |
| zero voltage indication | |
| LED display for input status | |
| RC filter | |
| removable varistor | |
| order no. | type | control voltage |
| 06 90 45 | HER 25 D | 3 ... 32 V DC |
| 06 90 14 | HER 25 A | 90 ... 280 V AC |
ST 10 Single-Phase Fuse Carrier for DIN Rail Mounting
Technical Data:
| for fuse set: | 10 x 30 |
| nominal voltage: | 600 VAC 1 |
| nominal current: | 32 A |
| dimensions: | 81 x 17.5 x 68 mm |
| order no. |
type |
| 06 90 49 | ST 10 |
| 06 90 13 | replacement fuse FF, 10.3 x 38 mm, 3 pcs., 25 A |
| 06 90 50 | replacement fuse FF, 10.3 x 38 mm, 3 pcs., 20 A |
| 06 90 53 | replacement fuse FF, 10.3 x 38 mm, 3 pcs., 10 A |
|
Solid-State-Relay |
Technical Data:
| load voltage: | 24 ... 280 V AC 1 (600 V peak) |
| load current: | 0.2 ... 20 A AC 1 (max. load) |
| loss heat: | from 5 A switching capacity a sufficient cooling must be guaranteed |
dimensions: |
45 x 57 x 23 mm |
| order no. | control voltage |
| 06 90 01 | 3 ... 32 V DC |
| 06 90 03 | 90 ... 280 V AC |
Advice: There always remains residual current in solid-state-relays, therefore a main switch or a contactor should be superposed.
Cooling element for solid-state-relay:
| order no. | dimensions | therm. resistance |
| 06 90 05 | 96 x 50 x 41 mm | 2.0 K/W |
Fuse set 16 A for solid-state-relay:
| order no. |
| 06 90 02 |
Replacement fuse FF 16 A:
| order no. | content |
| 06 90 04 | 5 pcs. |
Cap for solid-state-relay:
| order no. |
| 06 90 07 |
Home In General Products Company Profile Contents Contact