|
|
Wall Mounted Models - Series HT22
|
HT 22 High-Quality Temperature Regulator with Splash-Proof Case |
The HT 22 temperature regulator has a PD feedback and an electronic cold junction for thermocouples. To allow an adaptation to different controlled systems, it is equipped with an additional adjustable servo amplifier.
The relay is equipped with a potential-free change-over contact. Due to the fact that the number of switching is limited, the abrasion on the relay contacts is reduced. In case of an interrupted sensor line or a deficient sensor, the device is immediately cut off. Then, a control lamp indicates the failure.
The large space for connections has self-locking terminals. According to the VDE regulations, a main switch must be superposed to the regulator.
Technical Data:
| two-position-regulator | |
| control system: | P-PD |
| power control: | by relay |
| switching power at 230 V~: | 2300 W |
| degree of accuracy: | 1.5 % |
| control amplifier: | 0, 1, 2, 5, 10 % |
| safety class: | I |
| protection category: | IP 65 (DIN 40 050) |
| diameter of terminals: | 2.5 mm² |
| case dimensions: | 55 x 80 x 160 mm |
| case material: | ABS |
| order no. | range | sensor |
| 06 22 01 | 0 ... 100 °C | Fe-CuNi (J) |
| 06 22 02 | 0 ... 200 °C | Fe-CuNi (J) |
| 06 22 11 | 0 ... 250 °C | Fe-CuNi (J) |
| 06 22 03 | 0 ... 500 °C | Fe-CuNi (J) |
| 06 22 04 | 0 ...100 °C | NiCr-Ni (K) |
| 06 22 05 | 0 ... 250 °C | NiCr-Ni (K) |
| 06 22 06 | 0 ... 500 °C | NiCr-Ni (K) |
| 06 22 07 | 0 ... 1000 °C | NiCr-Ni (K) |
| 06 22 14 | 0 ... 50 °C | Pt 100 |
| 06 22 08 | 0 ... 100 °C | Pt 100 |
| 06 22 09 | 0 ... 200 °C | Pt 100 |
| 06 22 13 | 0 ... 250 °C | Pt 100 |
| 06 22 10 | 0 ... 500 °C | Pt 100 |
Home In General Products Company Profile Contents Contact