|
|
Wall Mounted Models - Series HT 20
|
HT 20 Temperature Regulator with Central Mains / Sensor Connection |
The HT 20 temperature regulator with plastic case has a seven-pole plug socket, where the sensor lines and power cables can be centrally connected to the heating. It is particularly suitable if regulator and connected heating (e.g. heating hoses, heating jackets, heating mats ...) have to be separated quite often.
A two-pole main switch and a two-pole restraint solid state relay increase the technical safety of the device. Due to the fact that the number of switchings is limited, the abrasion of the relay contacts is reduced.
In case of an interrupted sensor line or a deficient sensor, the device is immediately cut off. Then, a control lamp indicates the failure
On demand, the HT 20 regulator can also be delivered as HT 20/2 double regulator. Please ask for an offer!
Technical Data:
| two-position-regulator | |
| control system: | P-PD |
| power control: | with relay |
| switching power at 230 V~: | 2300 W |
| power switch: | all-pole, unlit |
| degree of accuracy: | 2.5 % |
| control amplifier: | 2 % |
| safety class: | II |
| protection category: | IP 50 (DIN 40 050) |
| power cable: | 1.3 m |
| case dimensions: | 77 x 80 x 185 mm |
| case material: | ABS / polycarbonate |
| order no. | range | sensor |
| 06 20 01 | 0 ... 100 °C | Fe-CuNi (J) |
| 06 20 02 | 0 ... 200 °C | Fe-CuNi (J) |
| 06 20 11 | 0 ... 250 °C | Fe-CuNi (J) |
| 06 20 03 | 0 ... 500 °C | Fe-CuNi (J) |
| 06 20 04 | 0 ...100 °C | NiCr-Ni (K) |
| 06 20 05 | 0 ... 200 °C | NiCr-Ni (K) |
| 06 20 12 | 0 ... 250 °C | NiCr-Ni (K) |
| 06 20 06 | 0 ... 500 °C | NiCr-Ni (K) |
| 06 20 07 | 0 ... 1000 °C | NiCr-Ni (K) |
| 06 20 08 | 0 ... 100 °C | Pt 100 |
| 06 20 09 | 0 ... 200 °C | Pt 100 |
| 06 20 13 | 0 ... 250 °C | Pt 100 |
| 06 20 10 | 0 ... 500 °C | Pt 100 |
Home In General Products Company Profile Contents Contact