|
|
Power Controller - Desktop Models
|
HLM Electromechanical Power Controller |
This electromechanical power controller for the power adjustment of resistive loads allows a continuous diminution of the power from 70 % to 4 %, which is directly visible on the scale. Mounting bores at the rear side make the fixing of clamps possible (accessories).
Technical Data:
| power control: | by mechanical contact | ||
| switching power at 230 V: | 2300 W | ||
| main switch: | double-pole | ||
| power control: | 4 ... 70, 100 % | ||
| safety class: | I | ||
| protection category: | IP 30 (DIN 40 050) | ||
| mains cable: | 1.5 m exchangeable | ||
| case dimensions: | 75 x 115 x 145 mm | ||
| case material: | coated steel, aluminum | ||
|
|
|
HLE 10 Electronic Power Controller up to 10 A |
This versatile power controller with electronic pulse control is suitable for the continuous adjustment of resistive loads up to 2300 W. Mounting boreholes at the rear side make the fixing of clamps possible (accessories).
HLE 10 can be combined with a contact thermometer according to DIN 41524. It is also possible to use an electronic contact thermometer (order no. 06 02 01, with AC adapter order no. 06 02 02).
Technical Data:
| power control: | triac | ||
| switching power at 230 V: | 2300 W | ||
| mains switch: | double-pole, luminous | ||
| power control: | 0 ... 100 % | ||
| safety class: | I | ||
| protection category: | IP 30 (DIN 40 050) | ||
| interf. suppression: | N (VDE 0875) | ||
| mains cable: | 1.5 m exchangeable | ||
| case dimensions: | 75 x 115 x 145 mm | ||
| case material: | coated steel, aluminum | ||
|
|
|
HLE 16 Electronic Power Controller up to 16 A |
For the continuous adjustment of higher resistive loads (up to 3600 W), the HLE 16 power controller was further improved.
Except for the breaking capacity, the length of the power cable and the dimensions, the technical data corresponds with the HLE 10.
Technical Data:
| power control: | triac | ||
| switching power at 230 V: | 3600 W | ||
| mains switch: | double-pole, luminous | ||
| power control: | 0 ... 100 % | ||
| safety class: | I | ||
| protection category: | IP 30 (DIN 40 050) | ||
| interf. suppression: | N (VDE 0875) | ||
| mains cable: | 1.3 m | ||
| case dimensions: | 75 x 165 x 145 mm | ||
| case material: | coated steel, aluminum | ||
|
|
Power Control Units - Wall Mounted Models
|
HLI Power Control Unit for QHG Heating Mantles |
This reasonably priced control device for QHG heating mantles of up to 100 L allows a power adjustment of each heating zone, which is infinitely variable from 4 % to 70 %. Each heating zone has a mains control lamp and an indication of the switching phase. The heating zones can be individually switched on and off.
Technical Data:
| voltage: | 230 V / 400 V |
| power control: | snap contact |
| setting range: | 4 ... 70 %, 100 % |
| breaking capacity per zone: | 3500 W AC 1 |
| safety class: | I |
| protection category: | IP 52 (DIN 40 050) |
| case dimensions: | 300 x 130 x 260 mm |
| case material: | ABS |
| order no. | type | |
| 04 01 03 | HLI 3 | (for 3 heating zones) |
| 04 01 04 | HLI 4 | (for 4 heating zones) |
|
HLD Power Unit for High Switching Currents |
With an HLD power unit, which is equipped with an integrated contactor, higher power, three-phase current or divergent voltages can be switched in a very simple and economical way. Depending on the requirements, it can be combined with the HT 22 or HT 24 regulators.
HLD is designed according to DIN 40 050, IP 65. A safety fuse (T2) allows the connection of the regulator to a phase of the 230 V mains, which is protected by a stronger fuse.
| Technical Data: | HLD 20 | HLD 35 | HLD 55 |
| switching power: | 10 / 12 kW | 17 / 22 kW | 30 / 35 kW |
| safety class: | II | II | II |
| protection category: | IP 65 | IP 65 | IP 65 |
| diameter of terminals: | 2.5 + 4 mm˛ | 2.5 + 10 mm˛ | 2.5 + 16 mm˛ |
| case dimensions: | 150 x 200 x 100 mm | 150 x 200 x 100 mm | 160 x 240 x 120 mm |
| case material: | ABS / polycarbonate | ABS / polycarbonate | ABS / polycarbonate |
| order no. | type | |
| 06 13 11 | HLD 20 | without regulator |
| 06 13 12 | HLD 35 | without regulator |
| 06 13 13 | HLD 55 | without regulator |
Home In General Products Company Profile Contents
Contact